Our 100w Dipole Kit contains everything you need to build and efficient and effective dipole.
 
Unlike the cheaper kit available from other stores the Radio-Stuff.com kit also contains the components needed to implement a common mode choke at the feed point of the antenna.  This isolates your antenna from your coax. this is best practice for a dipole.
 
The dipole is tough, lightweight, and portable. The PCB  when built is only 104 grams or 3.7 ounces.  A completed antenna (T140-43) with wire approximately 68 grams or 2.4 ounces (without wire).
 
This is an ideal antenna for SOTA or POTA activations, either hung from tree limb, or suported from a fibreglass pole as an inverted V or sloper.
 
The PCB is finished in green. It has two sets of tracks and supports 100w+ SSB and 25w+ CW/Data.
 
The kit has been designed to allow for two different cores types T140-43 and T140-61 sizes (contact us for the 61 mix option).
 
The Kit contains.
The PCB
Fair-Rite T140-43 core
M3 fittings including bolts, nuts and wing nut and solder tab
1m RG174
BNC connector
Cable ties
 
Note
Please check your SWR before using the antenna to ensure you have a good match with your transceiver before use. 
 
For prolonged use in bad weather, we would recommend waterproofing all electrical connections with liquid electrical tape or clear nail varnish.
 
If you need dog bone connectors or military wire then please pick these from the shop.